When inspecting the exterior of the building, look for the following:


Landscape plants within 18 inches of exterior walls.

Gutters & down sputs everywhere in good working order.

Any wood within 12 inches of (or especially in contact with ) ground.

Wood piles at least 18 inches away from house.

Look for general patterns of fading of the finish.

Look more carefully at areas that are most exposed to weather.

* South and west walls usually get more sun exposure.

* Walls facing prevailing winds are exposed to more rain.

* Look for patterns of weathering. Fading of the finish.

* Water staining on exposed log ends.

* Water staining on exposed walls.

* Make sure that no sprinkler directs water at the wall. Including water patterns on windy days! Get up close and personal Dust, pollens, etc. on upward facing portion of logs.

* Clean this stuff off with water or mild cleaning solutions. Inspect for any cracking, peeling or blistering of finish. Check water repellent quality of finish.

* Spray or splash water on walls, then look for it to "bead". Inspect for presence of molds or mildews.

* On top of finish (can it be washed off?)

* Underneath finish. Upward facing checks (1/4 inch or wider) should be sealed.

* Use Check Mate Carefully inspect logs for signs of moisture.

* Discolored wood.

* Softened wood. Pay special attention to all logs and ends extending to or beyond roof overhangs. Inspect integrity of all sealant joinery (Perma-Chink, Energy Seal, QSL, Check Mate) at log-log interfaces, windows, doors, checks, roof lines or any potential air or water intrusion points.

Home